Актуальные проблемы нефти и газа

УДК 622.276.66

А.Е. Верисокин, Л.Г. Жулина

НОВЫЙ МЕТОД СНИЖЕНИЯ ОБРАТНОГО ВЫНОСА ПРОППАНТА ИЗ ТРЕЩИНЫ В СКВАЖИНУ ПОСЛЕ ПРОВЕДЕНИЯ ГИДРОРАЗРЫВА ПЛАСТА

Аннотация

В статье представлено инновационное решение проблемы выноса проппанта из трещин гидроразрыва в ствол скважины. Данная проблема возникает вследствие неправильного выбора способа освоения скважины и материала для наполнения созданной трещины.

Проанализированы негативные последствия самопроизвольного выхода закрепляющего агента в скважину и существующие способы удержания наполнителя. В лабораторных условиях подтверждено влияние выбора вида используемого проппанта на проводимость трещины гидроразрыва пласта.

В результате исследования разработан новый вид проппанта, материал которого является интерметаллидом. Его преимущества обоснованы химическим составом и механическими свойствами. Основная роль предлагаемого проппанта заключается в формировании блокирующего экрана, не пропускающего обратный вынос наполнителя, удерживающего трещину от самопроизвольного закрытия. Проводимость трещины не ухудшается.

Ключевые слова: гидроразрыв пласта, проппант, трещина, обратный вынос, скважина.

А.Е. Verisokin, L.G. Zhulina

A NEW METHOD OF REDUCING THE PROPPANT BACKFLOW TO A WELL AFTER FORMATION HYDRAULIC FRACTURING

Abstract

The article presents an innovative solution to the problem of proppant backflow from formation hydraulic fracturing into the wellbore. This problem arises due to the wrong choice of the method of well development and the material for filling the created crack.

The negative consequences of proppant backflow and existing methods of retention proppant are analyzed. In laboratory conditions, the influence of the choice of the type of proppant used on the fracture conductivity was confirmed.

As a result of the study, a new type of proppant was developed, the material of which is intermetallic. Its advantages are justified by the chemical composition and mechanical properties. The main role of the proposed proppant is to form a blocking screen that does not miss the return removal of the proppant, keeping the crack from spontaneous closure. The fracture conductivity does not deteriorate.

Keywords: formation hydraulic fracturing, proppant, fracture, rate of recovery, well.

  DOI 10.29222/ipng.2078-5712.2019-27.art17

 

Полный текст статьи в формате PDF